Call Us0086-18052480219

Send us a Mail[email protected]

Home > BLOG > Description of the Product Use of Truss

Description of the Product Use of Truss

July 12,2023

truss Base:

Placed at the bottom of the column aluminum alloy lighting frame, it is used to support the column truss. There are movable legs under the base, which can be adjusted in height, which is very useful for performance venues with uneven ground. When in use, connect the upper anti-head with screws, and insert the diagonally supported water balance bar into the four holes around it.

Truss connector corner:

The shape is a 1-meter truss with a loose-leaf connection in the middle, and the upper part can rotate 180 degrees along the connection axis. The function of the corner is to facilitate the construction of the column truss. For the extremely high column aluminum alloy light frame, if there is no connector corner, it is necessary to use tools such as ladders to assemble each node of the column light frame, but it is very easy to use the corner. It is simple and convenient, first connect the column aluminum alloy light frame lying flat, then connect one end of the aluminum alloy light frame to the end of the corner, fix the bottom end of the corner to the base, and then several people together put the column truss to the poke up, very labor-saving.

truss frame square sleeve block:

The function of the square sleeve is to connect the column aluminum alloy light frame and the beam aluminum alloy light frame. When the square sleeve is pulled by a chain hoist, it can drive the beam to move up and down. The inside of the square sleeve is provided with a pulley, so that the square sleeve can slide vertically along the direction of the column. The square sleeve is different from the six-sided joint. After the six-sided joint is connected to the beam, it cannot move up and down, but the square sleeve can move.

Truss cross arm:

The function of the cross arm is to fix the upper end of the chain hoist, and it should bear the largest force, so it is generally made of steel. When in use, the cross arm is screwed to the top of the column truss, and then a chain hoist is hung on it, and the chain hoist is used to buy the beam light frame.

Truss Inclined brace:

The brace is used to reinforce the booth. When in use, it is fixed on the four pillars of the aluminum alloy lighting frame at the four corners of the booth to strengthen the booth. The oblique brace consists of two parts, the oblique rod and the cross rod. The horizontal bar is made of black painted iron, and the diagonal bar is made of aluminum alloy. When in use, one end of the cross bar is inserted into the hole of the base and tightened with a screw, one end of the oblique bar is fixed on the aluminum alloy light frame of the column with a single buckle, and the other end is screwed on the extension end of the cross bar support.

Hoist:

One end is fixed on the cross arm at the top of the column light frame, and one end is connected to the beam aluminum alloy light frame, and the zipper is pulled by hand to lift the beam aluminum alloy light frame.

111